DM7020S, DreamBox 7020S

Original Price:	US $572.22
Special Price:	US $400.99

Short Cut

The DreamBox 7020-Si has an updated tuner
producing amazing pictures! and the DM 7020S
is the highest end, most complete FTA receiver
on the market. This is truly the future of
satellite viewing. The DreamBox 7020S is a
digital satellite receiver with full
Ethernet communication capabilities.

Shopping Online

US $400.99

DreamBox 7020S Specifications: This Dreambox 7020 S digital satellite receiver with full Ethernet communication capabilities. Power PC driven with Linux operating system for endless possibilities, 250 MHz PowerPC Processor(350 Mips).
The DM 7020-S is a powerfull Top-Set-Box with 2 x Smartcard-Reader.

• Linux open source (most parts under the terms of GPL)
• Integrated Compact Flash Interface Slot
• 1 x DVB Common-Interface Slot
• 2 x Smartcard-Reader
• MPEG2 Hardware decoding (fully DVB compliant)
• Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
• Big-size LC-Display
• USB Port
• 10/100 MBit compatible Ethernet Interface
• Modem
• 12V switch cinch
• V.24/RS232 Interface
• Common NIM DVB-S
• 32 MByte Flash
• Channel-change time < 1 second
• 96 MByte RAM
• Unlimited channel lists for TV/Radio
• Integrated IDE UDMA66 Interface
• Supports directly bouquet-lists
• Support for internal HDD in any capacity
• Full automatic service scan
• Supports EPG (electronic program guide)'
• Supports multiple LNB-Switching control (supports DiSEqC)
• RF modulator
• S/PDIF Interface for digital bit stream out (AC-3)
• Supports own videotext
• Audio/Video cinch out
• Fully adaptable OSD in many languages and skin-support
• 2 x Scart-interfaces
• MINI-DIN connector for extern IR (send)

DreamBox 7020S Parts

DBS-Tuner: Frequency Range 950 . 2150 MHz Signal Level - 65 dBm . - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Common-Interface: Common-Interface Power Consumption max. 0,3A/5V Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 &mp; MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard> TV-Scart: Output: FBAS,RGB,S-Video over OSD selectable VCR-Scart: FBAS Mini DIN: I2C for stearing of external devices IR funktion Ethernet: 10/100 MBit compatible interface Function Update of Firmware, Connect to PC USB: USB 1.2 connector Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Pins:
1. 5V
2. SDA (I2C-Kanal 2)
3. SCL
4. 3,3V
5. GND
6. IR-Output
7. GND
LNB power and polarisation : LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB shut-off at Standby-Mode UDMA66 IDE Interface: Intern for connect HDD Compact Flash - Reader Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Physical specification: Ambient Temperature +15°C...+35°C Humidity < 80% Size (W x D x H): 374 mm x 230 mm x 75 mm Weight: 1,8 kg  without HDD Power consumption: < 20W (in operation, horizontal polarization / 400mA LNB current) < 11W (in operation, without LNB) < 4W (Deep-Standby-Mode) Input voltage: 230V / 50 Hz alternating acurrent +/- 15%

Shopping Online